Quality Melamine MDF Board Manufacturer factory Suppliers Malaysia

We are a trusted MDF Board Suppliers in Malaysia that supply quality MDF materials from standard grade, high moisture resistant and melamine MDF pannels.

Our MDF Board is made by fusing rubber wood with acacia wood under pressure and heat.

We supply standard material MDF board (E2), high moisture resistance material MDF Board (HMR) and melamine MDF pannels.

Medium Density Fibreboard is suitable for furnitures or decorative objects because the smooth surface is perfect for painting and its durability allows it to be molded to many shapes and sizes.

With our high moisture resistance MDF, it is the best material choice for kitchen counter top because standard MDF board cannot be in contact with water as it will cause swelling and small bumps on the surface

It has to be handled carefully because the inner layers of a MDF Board is soft and easy to be crush unlike its surface which is harder than most stand wood products.

Malaysia – MDF ( Wood Based Panels Supplier factory manufacturer exporter)

Mechanical Properties	Test Method	Unit	≥ 2.5 – 4.0	> 4.0 – 6.0	> 6.0 – 9.0	> 9.0 – 12.0	> 12.0 – 19.0	> 19.0 – 30.0
Thickness tolerance	BS EN 324-1	mm	±0.2
Size tolerance (length & width)	BS EN 324-1	mm	a) within 5mm (length) & within 2mm (width) for free trim panel b) +2 mm (width) and + 5mm (length) for nett size panel
Squareness	BS EN 324-2	mm/m	<1.5
Squareness (diagonal)	BS EN 324-2	mm	< 5
Average density	BS EN 323	kg/㎥	800-860	780-840	760-800	720-760	700-740	650-690
Board moisture	BS EN 322	%	5-8
Modulus of Rupture	BS EN 310	N/㎟ Ave	23	23	23	22	20	18
Modulus of elasticity in bending	BS EN 310	N/㎟ Ave	NA	2700	2700	2500	2200	2100
Internal bond (dry)	BS EN 319	N/㎟ Ave	0.65	0.65	0.65	0.60	0.55	0.55
Screw holding Face	BS EN 320	N/㎟ Ave	NA	NA	NA	NA	1050	1000
Screw holding Edge	BS EN 320	N Ave	NA	NA	NA	NA	850	700
Thickness swelling (24hr)	BS EN 317	% Max	35	30	17	15	12	10

detail view
Properties	Test Method / Unit	Classification	MDF	MDF LF	MDF LG	MDF MR	MFB
Desiccators Method	JIS A 1460 mg/L	F**** Ave ≤ 0.3 Max ≤0.4
		F***(E0) Ave ≤ 0.5 Max ≤0.7	√	√	√	√	√
		F** Ave ≤1.5. Max ≤2.1	√	√	√	√	√
CARB (Small Chamber Method)	ASTM D 6007 ppm	Phase 2 MDF Thin Board < 8mm < 0.13	√	√	√	√	√
CARB (Small Chamber Method)	ASTM D 6007 ppm	Phase 2 MDF Thick Board > 8.1mm < 0.11	√	√	√	√	√

– NOTES :The perforator values in this table apply to panels with moisture contents of 6.5%

Malaysia Flaxboard Chipboard PARTICLE BOARD Manufacturer supplier

One of the benefits of flaxboard is that if it is pressed to a low density (350 kg/m3), it has the same fire-resistant properties as or even better fire-resistant properties than wood. It also has excellent insulating and acoustic properties, and a good heat conducting coefficient – Lambda 0.071 W/m K at 350 kg/m3 compared to that of wood, which is around 0.13 W/m K at 650 kg/m3. Thanks to these properties, flaxboard is often used as a filler in walls and doors, especially in fire-resistant doors.

From an ecological perspective, we can assert that unlike wood, flax does not contain any naturally occurring formaldehyde. The glue used to produce the flaxboard can vary from E0 to E1. That way, we can comply with standards like the CARB regulations or the NAF (No Added Formaldehyde) standard. If flaxboard is used as a filler, then doors or wall panels can easily demand to 70% to 80% bio-based material.

Standard sized flaxboard is produced in dimension of 2,500 x 1,220 mm, but our welding facilities can be used to glue the boards into the desired dimensions.

Malaysia High Moisture Resistance Particle Board / MDF manufacturer and supplier

Particle Board (PB)

Available Thickness : 9, 12, 15, 18 & 25mm
Panel Size : 1220mm x 2440 mm (4’ x 8’)

Medium Density Fiberboard (MDF)

Available Thickness : 2.5 to 25mm
Panel Size: 1220mm x 2440mm (4’ x 8’)

High Moisture Resistance Particle Board / MDF

Melamine Faced Chipboard (MFC)

Available Thickness : 16, 18 & 25mm
Panel Size: 1830mm x 2440mm (6’ x 8’)

Melamine Faced Medium Density Fiberboard (MFMDF)

Thickness: 6mm – 25mm
Panel Size: 6’ x 8’, 4’ x 8’

Melamine Faced Synchronous Panel

Available Thickness : 18 & 25mm
Panel Size: 1830mm x 2440mm (6’ x 8’)

Lacquer Gloss Panel

Available Thickness : 18 & 25mm
Panel Size: 1830mm x 2440mm (6’ x 8’)

Oriented Strand Board (OSB)

Available Thickness : 18mm
Panel Size: 4’ x 8’

PVC Edge Banding Tape

12MM BEECH FACED MALAYSIA HARDWOOD EUCALYPTUS CORE PLYWOOD A/B CE2+ 2440MM X 1220MM (8′ X 4′) FSC® PACK OF 75 BIRCH ALTERNATIVE FACTORY SUPPLIER MANUFACTURER

12mm Beech Faced Hardwood Eucalyptus Core Plywood A/B CE2+ 2440mm x 1220mm (8′ X 4′) is the technical plywood solution designed and developed for the EU market as an alternative solution for Birch Plywood shortages. FSC® Certified. Comes in a pack of 75 sheets.

Pallet quantity	75 sheets
Thickness	12mm
Size	2440mm x 1220mm
Class	EN314-2 CI3 EN636-2 S
Country of origin
Edging	Square
Fire rating	None
Formaldehyde level	E1
Grade	A/B
Environmental certification	FSC®
Wood species	Eucalyptus

Malaysian 9MM BLACK HEXAGON PATTERN EUCALYPTUS CORE SLIP RESISTANT PHENOLIC FILM PLYWOOD 2440MM X 1220MM (8′ X 4′) FSC® supplier factory manufacturer

9mm Black Hexagon Pattern Eucalyptus Core Slip Resistant Phenolic Film Plywood 2440mm X 1220mm (8′ X 4′) FSC® Certified. These buffalo boards come in packs of 100 sheets.

Malaysian 4MM BIRCH PLYWOOD THROUGHOUT BB/CP 2440MM X 1220MM (8′ X 4′) FSC® Manufacturer and supplier

Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.

Applications	Feature walls, For use in cabinets, For use in floors, For use in furniture, For use in wardrobes
Class	formaldehyde emission level is significantly below EN 13986 Class E1 and it is certified as complying to EPA TSCA Title VI and CARB Phase 2.
Country of origin
Edging	Square
Features	Lackarable, Paintable, Varnish & stainable
Finish	Veneer finish smooth sanded
Fire rating	None
Formaldehyde level	E1 (low)
Grade	BB/CP

Malaysian 12MM BIRCH PLYWOOD THROUGHOUT BB/CP 2440MM X 1220MM (8′ X 4′) FSC® Manufacturer and supplier

Thickness	12mm
Size	2440mm x 1220mm
Applications	Feature walls, For use in cabinets, For use in floors, For use in furniture, For use in wardrobes
Class	BS-EN636 Class 2 (suitable for use in Class 1 & 2 humid interior or covered exterior application offering limited resistance to moisture during construction).
Country of origin
Edging	Square
Features	Lackarable, Paintable, Varnish & stainable
Finish	Veneer finish smooth sanded
Fire rating	None
Formaldehyde level	E1 (low)
Grade	BB/CP
Moisture resistant	No
Number of layers	9
Product standard	Structural
Veneer	Face-allows 3-6 small colour matched patches & some light mineral streaks. Tight pin knots may also be present, Light in colour but the face can have a slight variation in colour throughout the board, Reverse-allows for unlimited knots & patches. Filled splits also acceptable
Weather exposure	Exterior (needs to be treated), Interior
Wood species	Birch
Environmental certification	FSC®

Malaysia Flexible Plywood manufacturer factory

Flexible plywood, often called “flexiply” or “bending plywood” is a high quality bendable sheet material.

It is a lightweight moisture resistant plywood that is composed of multiple thin plies layers which can be bend to rounded shapes, curves and bends without needing water or heat-forming.

Flexible plywood is a very flexible plywood that it can be bent and rolled into any shape without cracking or split apart.

Hugely recommended by architects and designers, flexible plywood / flexiply are often used especially when producing modern furniture with high complexity concept.

Flexible Plywood Specifications

Malaysia Medium Density Fibreboard (MDF) manufacturer factory