MALAYSIAN HARDWOOD OKOUME FACE PLYWOOD

HARDWOOD OKOUME FACE

  • Thickness: 6, 9, 12, 15, 18, 25mm
  • A higher density than softwoods
  • Enhanced durability and strength
  • Pink to Red in Colour
  • Resilient to bending
  • Resilient warping, & cracking
  • Ceiling and Wall lining
  • Cheaper alternative to birch
  • Does not split easily
  • Highly versatile product
  • Interior and exterior use when sealed correctly with a paint system
  • B face – Extremely Clean face
  • ONLY USE WATER BASED SEALERS

SHEET SIZE: 2440 X 1220, 3050 X 1220, 3050 X 1530

Jumbo Sizing Available:  3050 X 1830 (only in 12mm and 18mm thick)

Malaysia MDF (Medium-density fibreboard) 2400 x 1200, 2700 x 1200, 3600 x 1200/1800

MDF (Medium-density fibreboard)

  • Thickness: 3, 6, 9, 12, 16, 18, 25, 32mm
  • Easy to cut
  • Great for bespoke shapes
  • Cheaper than natural woods
  • MDF strong & lightweight
  • No wood grains, patterns, or knots
  • Easy to Sand & Finish
  • Easily machinable
  • Hard, Flat & smooth surface
  • Can be painted
  • Internal Use Only

SHEET SIZE:  2400 x 1200, 2700 x 1200, 3600 x 1200/1800

Radiata Plywood Non-Structural Grooved Lining H3.1 LOSP Treated 2700 x 1200 x 12mm

of the panel at 100mm centres. Grooved Lining is suitable for sheltered exterior applications such as soffit linings. Manufactured under a third party-audited quality control programme and certified by the Engineered Wood Products Association of Australasia (EWPAA) Joint Accreditation System – Australia and New Zealand (JAS-ANZ) certification as compliant with NZ Building Code standard AS/NZS 2269 Plywood Structural.

  • Manufactured from sustainably grown NZ plantation pine in compliance with the NZ Forest Accord
  • Grooved Lining is designed for high-appearance interiors
  • Uncoated high appearance surface suitable for clear, stain and paint finishes
  • H3.1 LOSP Treated Radiata Pine suitable for above ground exposed applications
  • Available FSC® CoC Certified on request
  • Low formaldehyde emission (E0)

Malaysia Stress Grades: F11,F8 Pine Plywood Structural

Sheet Size: 2400 x 1200, 2700 x 1200mm
Glue Bond: “A” Bond “Phenolic” black colour – 72 hour boil.

Stress Grades: F11
Thicknesses: 9mm, 12mm, 15mm, 17mm, 19mm, 21mm, 25mm
Sheets/Pallet: 9mm/60, 12mm/40, 15mm/35, 17mm/32, 19mm/44, 21mm/28, 25mm/20

Stress Grades: F8
Thicknesses: 7mm & 9mm

Malaysia Hexa Flim-Face Plywood

Hexa Flim-Face Plywood

Woodpanels Hexa Flim-Face Plywood

Our Hexa Birch is a premium exterior-grade Birch plywood with a smooth Dark-Brown Phenolic film on the back and an embossed Hexa-pattern Phenolic film on the front face. Birch Hexa is ideal for many applications including Stages, Wheel-chair access ramps, Road Cases, Architectural joinery and Industrial Furniture.

Applications

  • Decorative flooring panel
  • Wear resistant
  • Slip resistant

Hexa Flim-Face Plywood Specifications

GRADE THICKNESS – MM SIZE – MM COLOR
Exterior 12, 18 2440 x 1220 Black

Malaysia F11 F14 F17 Form Plywood AS/NZS 2269

Form Plywood

Wood Panels Form Plywood

F17 Formply is cost effective, high quality fixed formwork product. With a resin impregnated paper overlay and it is ideal for reusable concrete formwork. It is manufactured under strict structural requirements of AS/NZS 2269.

The hard surface is durable and able to withstand the harshness of construction and weather conditions.

The life of the Form ply depends of care and maintenance at the site. Re-used depends almost entirely on site factors, and cannot therefore be predicted accurately.

Benefits of Using Form Plywood

  • Can be reused as long as proper care and maintenance is provided
  • Lighter in weight then hardwood alternatives
  • Provides builders and form workers with an ideal surface for pouring concrete with a Class 2 concrete finish on the first pour

Form Plywood Specifications

GRADES THICKNESS – MM SIZE – MM
F11 12 2440 x 1220
F14 17, 25 2440 x 1220

Malaysian F8 and F11 AS/NZS 2269 Structural Plywood

Structural Plywood

Wood Panels Structural Plywood

Our C/D Structural Plywood is great ‘value for money’ multi-purpose plywood suitable for most general purpose applications. Reasonably priced, with quality faces. It is an extremely workable and user friendly panel.

Structural Plywood is manufactured under AS/NZS 2269 standard which is suitable for all structural applications with stress grades of F8 and F11.

Structural Plywood Specifications

GRADES THICKNESS – MM SIZE – MM
C/D Exterior 7, 9, 12, 15, 17, 19, 25 2440 x 1220

Malaysia A/A Radiata Plywood  Non-Structural Plywood

Non-Structural Plywood

Wood Panels A/A Radiata Plywood 

A/A Radiata Pine Plywood panels are manufactured from defect-free face veneers produced from pruned plantation-grown Radiata Pine logs.  The face veneers of the A/A Radiata Pine Plywood panels are therefore of excellent appearance, suitable for a wide range of decorative applications.

Non-Structural Plywood Specifications

GRADES THICKNESS – MM SIZE – MM
A/A Exterior 12, 15, 18, 25 2440 x 1220
B/C Exterior 9, 12, 15, 18, 25 2440 x 1220

Features

The key features of A/A Plywood panels are:

  • High-quality solid face, facilitating easy finishing.
  • Stable core veneers.
  • Sanded faces with a limited number of defects.

Applications

The main applications for A/A Radiata Pine Plywood panels are:

  • Staircases
  • Table and counter tops.
  • Cabinets
  • Underlayment
  • General industrial applications and other applications requiring faces with no open defects.

Malaysia Colored MDF and Black Diamond ( Black MDF ) 

BLACK DIAMOND MDF AVAILABLE IN:

Our Colored MDF is available in Black Diamond ( Black MDF ) . 6mm, 9mm, 12mm, 16mm, 18mm and 25mm  49 x 97 and 18mm in 49×121 available for prompt ship.

Malaysian Colour core and black Core MDF Specialist MDF

Specialist MDF

MDF comes in a diverse range of resin types from LFE (Low Formaldehyde Emissions), MR (Moisture Resistant), E0 (Ultra Low Emissions), E0/MR and HPF (High Performance Fiberboard). 

The main benefits of MDF are the smooth face surfaces which allow for high quality pressing and painting finishes, making this material a fantastic all-round product for interior use. 

MDF is a manufactured wood panel and as such can be altered in the manufacturing process.  Resins and colours can be added to create coloured board or boards resistant to water or fire,  treatments can be applied to create boards that are primed and ready for painting or even pressed with more or less fibre to create  either a high density product (very dense and heavy) or a Low density product (light in weight).

These are some of the more specialized MDF products available in the market.

  • Colour core MDF 
  • Primed (ready for painting)
  • Fire Retardant 
  • Waterproof (Tricoya) 
  • Low Density (LDF),  
  • V Grooved MDF