Malaysia StrongPly14TM Hoop Pine Structural Plywood F14/F14 H3.2 CCA Treated CD Square Edge 2400 x 1200 x 25mm

StrongPly14™ square edge F14/F14 plywood common uses include flooring, roofing, membrane substrates, and structural bracing. All IBuilt structural plywood is manufactured to AS/NZS 2269.0:2012 plywood structural standard and with low formaldehyde emission (E0). All IBuilt plywood is 3rd party certified.

  • Manufactured from sustainably grown Hoop plantation pine
  • CD grade may have some knots less than 50mm
  • Open defects on the face are filled and sanded
  • H3.2 CCA Treated pine suitable for above-ground exposed applications
  • Is produced using PEFC™ Controlled Source Timber
  • This Plywood from Ibuilt is an imported Plywood

Kokoda F14/F17 Hardwood H2 PLY

Kokoda F14/F17 Hardwood H2 PLY

Kokoda Hardwood is manufactured from selected structural hardwood veneer with a “C” grade face and a “D” grade back. Material is sourced from sustainably managed forests, using a mixed eucalypt. Product is termite treated to a H2 glue line.

Sheet Size: 2400 x 1200mm & 2700 x 1200mm (15mm, 17mm & 25mm)
Glue Bond: “A” Bond “Phenolic” black colour – 72 hour boil.
Thicknesses: 7mm(3 ply); 9mm(3 ply); 12mm(5 ply); 15mm(5 ply); 17mm(7 ply); 19mm(9 ply); 21mm(9 ply) and 25mm(11 ply)
Sheets/Pallet: 7mm – 115; 9mm – 90 ; 12mm – 75; 15mm – 60; 17mm – 50; 19mm – 45; 21mm – 40; 25mm – 35; 35mm – 23
Stress Grades: F14/F17

Malaysia CD PLY STRUCTURAL F8 15MM 2400 X 1200MM 3/8″ A/C Pine Exterior Plywood

C/D structural plywood is a versatile certified structural plywood panel, suitable for many building applications where aesthetic appearance is not essential.

The C grade face has a sanded, non-appearance finish where splits and knots are putty-filled. The D grade back has a rough, unsanded, non-appearance finish where limited imperfections are considered acceptable.

Manufactured to the AS/NZS 2269 structural standard using an ‘A’ bond glueline, structural plywood contains veneers that have been stringently measured and tested for strength and stiffness. And being a FSC certified product, it is made from 100% renewable softwood plantation pine.

Uses for structural ply include domestic and commercial building construction, furniture, shelving, cabinetry, hoarding, barricades, pallets, bins, crates, stage settings, display stands, cubby houses and dog kennels.

  • 2400mm x 1200mm x 15mm

DD F8 Structural Plywood 25mm x 2400×1200 Ecoply

Grade: DD F8 Structural Plywood
Sheet Size: 2400x1200mm
Thickness: 25mm
Surface Finish: Pine un-sanded face, with splits, knots and defects, D Face on both sides

Used For: non visual bracing, pallets, structural components and DIY projects, where known structural characteristics are required.

Pack size: sold as loose sheets or in packs of 20 sheets

Malaysia AS/NZS 6669 Structural rating F14 – F22 Glue bond A bond (Exterior) FORMPLY

Manufactured using a high-density overlay (HDO) of phenolic resin impregnated paper bonded to plywood, Formply is an ideal product for concrete formwork. Due to its A bond glue line, Formply can also be utilised in interior and exterior non-structural applications.

Standard: AS/NZS 6669
Structural rating: F14 – F22
Glue bond: A bond (Exterior)
Structural Applications: Concrete form-work, bridge building and any application requiring a known structural rating.
Non-Structural Applications: Multi purpose use, still utilising an exterior glue line including cabinetry and joinery.

Malaysia F11 (all thicknesses)  F8 (7mm and 9mm), F11 (12mm – 25mm) AS/NZS2269, FSC Certified CD Structural Plywood

CD Structural Plywood is a versatile substrate made from 100% plantation grown timber. It is manufactured to the AS/NZS2269 plywood structural standard and FSC certification. CD Structural Plywood can be used for exterior and interior applications where aesthetic appearance is not critical.

Plyco’s Hardwood CD Structural is plantation grown Eucalypt imported from South Asia and offers both affordability and a consistent F11 structural rating. Our Softwood CD Structural Plywood is plantation grown pine raised in Australia and New Zealand and, in addition to offering greater variety in sheet sizes, delivers variable structural strength across thicknesses (see below).

Face Grade: C Grade (repaired and sanded)
Back Grade: D Grade (un-sanded and can contain open knots)
Bond: A-Bond (Exterior)
Hardwood Structural Rating: F11 (all thicknesses)
Softwood Structural Rating: F8 (7mm and 9mm), F11 (12mm – 25mm)
Standard: AS/NZS2269, FSC Certified
Applications: Multi-purpose

Malaysia F8 Pine Plywood Structural “A” Bond “Phenolic” black colour – 72 hour boil

Sheet Size: 2400 x 1200, 2700 x 1200mm
Glue Bond: “A” Bond “Phenolic” black colour – 72 hour boil.

Stress Grades: F11
Thicknesses: 9mm, 12mm, 15mm, 17mm, 19mm, 21mm, 25mm
Sheets/Pallet: 9mm/60, 12mm/40, 15mm/35, 17mm/32, 19mm/44, 21mm/28, 25mm/20

Stress Grades: F8
Thicknesses: 7mm & 9mm

Malaysia A bond and the glue is H2S treated Hardwood H2S Ply Brace Hardwood Structural Plywood Bracing

Hardwood Structural Plywood Bracing

This hardwood structural bracing is manufactured using mixed source hardwoods to AS/NZS2269. Suitable for structural bracing applications such as wall or roof bracing with an A-bond glue line for exposure to heat, cold and wet conditions.

Grade/Treatment
F22 Hardwood

Thickness (mm)

All sizes are 4mm thick

Sizes (mm)

2440  x   900
2440  x   1200
2745   x   900
2745   x   1200
3050  x   900
3050  x   1200

Pack Qty (pieces)

All sizes come in pack quantities of 150

Hardwood H2S Ply Brace

This hardwood ply brace is compliant to AS/NZS 2269.0:2012. It is high strength Class A bond and the glue is H2S treated for termite resistance. Suitable for structural bracing applications such as wall or roof bracing.

Grade/Treatment
F27 Hardwood

Thickness (mm)

All sizes are 4mm thick

Sizes (mm)

2440  x   1200
2745   x   1200
3050  x   1200
2440  x   900
2745   x   900
3050  x   900

Pack Qty (pieces)

All sizes come in pack quantities of 150

Malaysian Hardwood Film Faced Non-Structural Plywood

Hardwood Film Faced Non-Structural Plywood

A non-load bearing hardwood plywood with a high density overlay that is suited to formwork and temporary weather-proofing applications. Hardwood plywood is an engineered wood product that performs well in high humidity and high temperature environments.

Grade/Treatment
Film Faced.

Thickness (mm)

17
25

Sizes (mm)

2400  x  1200
2400  x  1200

Pack Qty (pieces)

54
40

Malaysia F17 Film Faced Structural Plywood AS/NZS6669

F17 Film Faced Structural Plywood

This structural plywood features a high density overlay that is suited to horse stables, shed wall linings, work benches, furniture and formwork applications. Delivering dimensional stability, an F17 structural rating and manufactured to AS/NZS6669 with an A-bond glue line for external use.

Grade/Treatment
Film Faced. A-bond glue line.
F17.

Thickness (mm)

17
17

Sizes (mm)

1800  x   1200
2400  x  1200

Pack Qty (pieces)

46
39

Pine Plywood Non – Structural A Bond Film Faced

This non-load bearing plywood features a high density overlay that is suited to formwork and hoarding applications. Manufactured from responsibly sourced plantation radiata pine, with an A-bond waterproof glue line for external use. Super E0 panels available on request.

Grade/Treatment
Film Faced. A-bond glue line.

Thickness (mm)

12
17
25

Sizes (mm)

2400  x  1200
2400  x  1200
2400  x  1200

Pack Qty (pieces)

80
54
40